Mobicon-Remote Electronic Pte Ltd
50 Ubi Ave 3,
#02-06 Frontier,
Singapore 408866.
+65-67477472
+65-67476768

Comet H5524- remote CO2 concentration with Ethernet interface and two relays

Previous 28 / 144 Next

Comet H5524- remote CO2 concentration with Ethernet interface and two relays Transmitters and Regulators Comet
Quantity
Add Quotation


Download Files

Cometsystem_H5524.pdf (2.06 MB)
code: H5524
CO2 level transmitter with two output relays.

 

The CO2 measurement is based on a 2-source, 2-beam process. CO2 measurement with long-term stability is guaranteed thanks to the proven non-dispersive infrared (NDIR) CO2 measurement cell. The unique patented auto-calibration procedure compensates for aging of the infrared source and guarantees high reliability, long term stability and eliminates the need of periodical recalibration in the field.

 Included in delivery:

  • H5524 sensor
  • Traceable calibration certificate
  • Quick start manual
  • Technical support at discussion forum

Transmitter is also equipped with three alarm LEDs:

Green LED shines - CO2 concentration 0 to 1000 ppm

Yellow LED shines - CO2 concentration 1001 to 1200 ppm

Red LED shines - CO2 concentration 1201 ppm and more

Technical parameters Value
Output Ethernet
Measured Value CO2
Construction Type Ambient Air
Design Industrial
Temperature Measuring Range to °C
Relay Output Yes
Two-State Input No
Lcd Display Yes
PoE No
Range of CO2 concentration measurement 0 to 2000ppm
Accuracy of CO2 concentration measurement ±(50ppm +2% from reading) at 25°C and 1013hPa
Optional range of CO2 concentration measurement 0 to 10000ppm ±(100ppm +5% from reading) at 25°C and 1013hPa
Resolution 1ppm
Measuring interval 15s
Temperature operating range -30 to +60°C
IP protection IP30
Number of relay outputs 2
Maximum switching voltage, current and power of relay output 50V, 2A, 60VA
Audible alarm built-in beeper - switchable
LAN connection RJ-45 connector, 10Base-T or 100Base-TX
Communication protocols WWW, ModbusTCP, SNMPv1, SOAP, XML
Alarm protocols E-mail (SMTP authentication is supported), SNMP Trap, Syslog
Configuration WWW interface, T-Sensor
Power 9 to 30Vdc, power consumption approximately 1W
Power connector co-axial, diameter 5.5 x 2.1mm
Dimensions 136 x 150 x 45mm (W x H x D)
Weight approximately 320g

Optional accessories

Description
AC/DC adapter 230Vac to 12Vdc/0.5A
Tool for easy connection to WAGO terminals 233 for serial output transmitters
KIT-GSM with modem
TL-POE10R - PoE splitter
TP-LINK-TL WA5110G wifi adapter


You have 0 items in you cart. Would you like to checkout now?
0 items
Switch to Mobile Version
Recent Updates
Subscribe Newsletter
1
Hello! Thanks for visiting my site. Please press Start button to Contact with Admin :)

Start