Mobicon-Remote Electronic Pte Ltd
50 Ubi Ave 3,
#02-06 Frontier,
Singapore 408866.
+65-67477472
+65-67476768

Comet H4531 - thermometer with Ethernet interface and relays

Previous 19 / 145 Next

Comet H4531 - thermometer with Ethernet interface and relays Transmitters and Regulators Comet
Quantity
Add Quotation


Download Files

Cometsystem_H4531.pdf (1.64 MB)
code: H4531
Temperature Ethernet sensor for Pt1000 sensors with two relay outputs.
 

Sensor H4531 is designed for online monitoring of temperature. Three binary inputs to detection of two-states signals are the advantage. Other devices are controlled by two relay outputs.

Included in delivery:

  • H4531 sensor
  • Traceable calibration certificate
  • Quick start manual
  • Technical support at discussion forum

Technical parameters Value
Output Ethernet
Measured Value Temperature
Construction Type For External Temperature Probe Pt1000
Design Industrial
Temperature Measuring Range -200 to 600 °C
Relay Output Yes
Two-State Input Yes
Lcd Display Yes
PoE No
Accuracy of temperature output ±0.2°C (without temperature probe)
Resolution 0.1°C
Measuring interval 2s
Available temperature units degrees Celsius, degrees Fahrenheit
Temperature operating range -30 to +80°C
IP protection IP40
Number of relay outputs 2
Maximum switching voltage, current and power of relay output 50V, 2A, 60VA
Number of binary inputs 3
Signal for binary inputs dry contact, open collector or two-state voltage signal.
Inputs are not galvanically isolated.
Minimum pulse length at binary input 500ms
Low voltage level at binary input 0 to +0.5V
High voltage level at binary input +3.0 to +30V
Audible alarm built-in beeper - switchable
LAN connection RJ-45 connector, 10Base-T or 100Base-TX
Communication protocols WWW, ModbusTCP, SNMPv1, SOAP, XML
Alarm protocols E-mail (SMTP authentication is supported), SNMP Trap, Syslog
Configuration WWW interface, T-Sensor
Temperature operating range of LCD display readable to operating temperature +70°C, it is recommended to switch OFF the LCD over +70°C
Power 9 to 30Vdc, maximum consumption 1W
Power connector co-axial, diameter 5.5 x 2.1mm
Probe type Pt1000/3850, shielded cable maximum length 10m
Dimensions 136 x 160 x 45mm (W x H x D)
Weight approximately 340g

Optional accessories

Description
AC/DC adapter 230Vac to 12Vdc/0.5A
COMETEO Multi-Plate Radiation Shield for Sensors, Naturally Ventilated
The LD-12 flood detector
The optical smoke detector SD-280
Motion detector JS20
Magnetic door contact SA-200-A
Magnetic door contact with cable length 2m
Magnetic door contact with cable length 5m
Magnetic door contact with cable length 10m
Magnetic door contact with cable length 15m
Magnetic door contact with cable length 20m
Magnetic door contact with cable length 30m
Power detector SP008
Tool for easy connection to WAGO terminals 233 for serial output transmitters
KIT-GSM with modem
TL-POE10R - PoE splitter
TP-LINK-TL WA5110G wifi adapter


You have 0 items in you cart. Would you like to checkout now?
0 items
Switch to Mobile Version
Recent Updates
Subscribe Newsletter
1
Hello! Thanks for visiting my site. Please press Start button to Contact with Admin :)

Start